CMSMS 2.0 (say what now?!)

Project Announcements. This is read-only, as in... not for problems/bugs/feature request.
Ted
Power Poster
Power Poster
Posts: 3329
Joined: Fri Jun 11, 2004 6:58 pm
Location: Fairless Hills, Pa USA

Re: CMSMS 2.0 (say what now?!)

Post by Ted »

Just an update, since the interest is starting to grow...

Last week was a busy week, so I didn't get too far.  I'm expecting this week to be the same, as I'm finishing up a few things that need to be knocked out before the end of the year.

However, I'm off all next week from work for the holiday, so I'm hoping to pick 2.0 back up starting this weekend.  The idea is to start finishing up some of the things that are started, most notably the permissions changes.  Once that and multilang are wrapped up, I'll start thinking about posting some pre-pre-pre alphas for the people interested in the changes so far.

Again, I don't foresee a beta before February as there is still a lot of holes left to fill, but it's getting there.  At least if I can show that it's not vaporware, I can help rally the masses to help finish it up.  :)
nuno

Re: CMSMS 2.0 (say what now?!)

Post by nuno »

Ted wrote: Just an update, since the interest is starting to grow...

Last week was a busy week, so I didn't get too far.  I'm expecting this week to be the same, as I'm finishing up a few things that need to be knocked out before the end of the year.

However, I'm off all next week from work for the holiday, so I'm hoping to pick 2.0 back up starting this weekend.  The idea is to start finishing up some of the things that are started, most notably the permissions changes.  Once that and multilang are wrapped up, I'll start thinking about posting some pre-pre-pre alphas for the people interested in the changes so far.

Again, I don't foresee a beta before February as there is still a lot of holes left to fill, but it's getting there.  At least if I can show that it's not vaporware, I can help rally the masses to help finish it up.  :)

Thanks TED was Interesting really try, new ideas may emerge
streever

Re: CMSMS 2.0 (say what now?!)

Post by streever »

Ted,

so many people are already so excited
no one thinks it's vaporware :D

I think with the retooling of permissions ;-) and some of the other features, you are moving closer and closer to the stability of drupal & joomla.

Right now this system is simpler & runs more cleanly then either: with the improvements you are making now, I think it will get even more users.

Then, hopefully, some of us can get to a level where we can contribute some of the features the CMS could use to take it to the next level!
JeremyBASS

Re: CMSMS 2.0 (say what now?!)

Post by JeremyBASS »

Hello, i'm loving this cms, and would love to help.  I work with OScommerce all the time and see alot of things that would be great for this.  Let me know how i can help get a new version out.
Pierre M.

Re: CMSMS 2.0 (say what now?!)

Post by Pierre M. »

Hello,
JeremyBASS wrote: Hello, i'm loving this cms, and would love to help.  I work with OScommerce all the time and see alot of things that would be great for this.  Let me know how i can help get a new version out.
Please see the forge and its several commerce/shopping modules. Please search the documentation and these forums for "cart", "shop", "commerce" and such keywords. There are several projects and it would be cool if you joined one of them or give feedback about them.
Have fun with CMSms

Pierre M.
cb2004
Power Poster
Power Poster
Posts: 317
Joined: Wed Jul 04, 2007 3:39 pm

Re: CMSMS 2.0 (say what now?!)

Post by cb2004 »

Any 2.0 news? Can we test a working version from SVN or anything?
Ted
Power Poster
Power Poster
Posts: 3329
Joined: Fri Jun 11, 2004 6:58 pm
Location: Fairless Hills, Pa USA

Re: CMSMS 2.0 (say what now?!)

Post by Ted »

Nothing much new to see.  Again, life and side work has gotten in the way of 2.0 development, and it's starting to get a bit frustrating...

2.0 should be done by now, but we basically have 0 resources to devote to it and as much as I try, it's hard to get ahead.
cb2004
Power Poster
Power Poster
Posts: 317
Joined: Wed Jul 04, 2007 3:39 pm

Re: CMSMS 2.0 (say what now?!)

Post by cb2004 »

So 2.0 is not any different from 1.2.3 at the minute?
calguy1000
Support Guru
Support Guru
Posts: 8169
Joined: Tue Oct 19, 2004 6:44 pm
Location: Fernie British Columbia, Canada

Re: CMSMS 2.0 (say what now?!)

Post by calguy1000 »

It's significantly different, there just isn't much new to 'see'.  and it's not ready for testing yet.
Follow me on twitter
Please post system information from "Extensions >> System Information" (there is a bbcode option) on all posts asking for assistance.
--------------------
If you can't bother explaining your problem well, you shouldn't expect much in the way of assistance.
Ted
Power Poster
Power Poster
Posts: 3329
Joined: Fri Jun 11, 2004 6:58 pm
Location: Fairless Hills, Pa USA

Re: CMSMS 2.0 (say what now?!)

Post by Ted »

Sorry, yeah, I didn't explain myself very well.  There is nothing that would be noticed to the regular user.  Most of the changes are under the hood and a lot is based around ease of development, performance and restructuring of code.

There is a new admin interface look now, which is nice.  But it's neither final or complete yet.  The admin has been ported over the jquery, which made the javascript a lot less painful.

The changes that will affect the users, namely permissions changes haven't been finished yet.  The new editing interfaces for content, using the new block system are done and work nicely.  Some of the other little pieces are done as well.

The new installer works, but needs a facelift.  It's also missing a few features regarding corner cases (creating a new database, checking all proper permissions, etc).

The integrated front end users stuff is in there, but no login and logout plugins exist yet.  The initial stab I took at openid is there as well, but needs integration into a front end form/plugin as well...

There are tons of other changes in there, but these are the ones that come to mind as of stuff done in the last couple of months.

2.0 is close, but there's still a lot of work to do and not a lot of time to do it.
cb2004
Power Poster
Power Poster
Posts: 317
Joined: Wed Jul 04, 2007 3:39 pm

Re: CMSMS 2.0 (say what now?!)

Post by cb2004 »

I see. Well keep up the good work. 2.0 sounds amazing by what you have said. Content blocks is somethings that would blow other CMS's out the water.
nivekiam

Re: CMSMS 2.0 (say what now?!)

Post by nivekiam »

Content blocks is somethings that would blow other CMS's out the water.
You may want to see what Magento is doing.  True, it's an eCommerce package and not just a CMS, but it's built from the ground up to think in terms of blocks.  However, their templating system is far from end-user friendly.
streever

Re: CMSMS 2.0 (say what now?!)

Post by streever »

Ted:

Are there tasks that others can do?

Let us know!

I know the dev team all has things assigned, but if all the jobs were listed somewhere, others could work on smaller components, too!
nhaack

Re: CMSMS 2.0 (say what now?!)

Post by nhaack »

Thinking of documentation ;)...

are you writing user docs already for parts of what has been done? So a decent documentation is ready together with the release. Or do you already work on it? Can I be of any help with that?

Good work however. I enjoy CMSMS and I am very courius on what's to come!

Nils
cb2004
Power Poster
Power Poster
Posts: 317
Joined: Wed Jul 04, 2007 3:39 pm

Re: CMSMS 2.0 (say what now?!)

Post by cb2004 »

streever wrote: Ted:

Are there tasks that others can do?

Let us know!

I know the dev team all has things assigned, but if all the jobs were listed somewhere, others could work on smaller components, too!
Agree with this!
Post Reply

Return to “Announcements”