[Solved] Passing FrontEndUser user data to a FormBuilder form

tosd · Post by **tosd** » Wed Dec 19, 2007 3:12 am

Hello,

My setup details - CMSMS: 1.2.2 FEU: 1.3.1 CustomContent: 1.4.10 FormBuilder: 0.4.4

I would like to pass the FEU user data (not just the customcontent_loginname) to a FormBuilder form so that the form is pre-loaded with the logged in user's details.

Aspects of this are covered in various posts and by using the excellent help provided by CalGuy1000 and others I have been able to come up with the following UDT to access the data I need:

-------------------------------------------------------------------------
global $gCms;
$feusers = $gCms->modules['FrontEndUsers']['object'];
if( $feusers )
{
$uid = $feusers->LoggedInId();
$properties = $feusers->GetUserProperties($uid);
$firstname= ( $properties [1][data]);
$lastname= ( $properties [2][data]);
$email= ( $properties [3][data]);
$phone= ( $properties [4][data]);
echo $firstname . " " . $lastname . " " . $email . " " . $phone ;
}
-----------------------------------------------------------------------

So the information is there, I can access it, and (using the test 'echo' statement) I can display it correctly on a page. To pre-load the variables into a FormBuilder form I thought I should be able to use:

{cms_module module='FormBuilder' form='b_tempted' value_fld25= $firstname}

After all, as I have the variable $firstname echoing to the same page as the form I reasoned that it must be accessible. This does not seem to be the case though. I have tried many variations but no matter what I do I cannot seem to get $firstname to pre-load into the form. This would be an incredibly useful thing to be able to do.

If anyone can help with this I would be very grateful. Thanks in advance - Michael.

calguy1000 · Post by **calguy1000** » Wed Dec 19, 2007 3:19 am

You're 1/2 way there....

Your UDT is in php space, whereas the {cms_module module=FormBuilder...} stuff is in smarty space.

You need to assign the appropriate values to smarty.

i.e:

Here's your udt:

-------------------------------------------------------------------------

Code: Select all

global $gCms;
$feusers = $gCms->modules['FrontEndUsers']['object'];
if( $feusers )
  {
      $uid = $feusers->LoggedInId();
      $properties = $feusers->GetUserProperties($uid);
      $firstname= ( $properties [1][data]);
      $lastname= ( $properties [2][data]);
      $email= ( $properties [3][data]);
      $phone= ( $properties [4][data]);
      echo $firstname . " " . $lastname . " " . $email . " " . $phone ;
  }

-----------------------------------------------------------------------

if you change it to:

-------------------------------------------------------------------------

Code: Select all

global $gCms;
$feusers = $gCms->modules['FrontEndUsers']['object'];
if( $feusers )
  {
      $uid = $feusers->LoggedInId();
      $properties = $feusers->GetUserProperties($uid);
      $firstname= ( $properties [1][data]);
      $lastname= ( $properties [2][data]);
      $email= ( $properties [3][data]);
      $phone= ( $properties [4][data]);

      $smarty->assign('firstname',$firstname);
      $smarty->assign('lastname',$lastname);
      $smarty->assign('email',$email);
      $smarty->assign('phone',$phone);
  }

-----------------------------------------------------------------------

and call this udt above the call to formbuilder, then things would probably just 'work'
btw... this has already been done with the CustomContent module.

Code: Select all

{cms_module module='FormBuilder' form='b_tempted' value_fld25= $ccuser->property('firstname')}

would probably just.... work.

tosd · Post by **tosd** » Wed Dec 19, 2007 3:53 am

Hi CalGuy1000,

You said your suggestion "would probably just.... work" - and it did

That really is an excellent solution. Many thanks for your prompt response.

I have got so much out of your contributions to this forum I would just like to take this opportunity the thank you. The generous way you give your time to help "learners" such as myself is very much appreciated.

Cheers, Michael

calguy1000 · Post by **calguy1000** » Wed Dec 19, 2007 3:57 am

Kudos?

I'm trying to get ahead of cyberman

tosd · Post by **tosd** » Wed Dec 19, 2007 9:29 am

Oops, I spoke too soon CalGuy1000 - but you can still have the kudos - it's been earned many times over

tosd · Post by **tosd** » Thu Dec 20, 2007 8:13 pm

Hello,

After much playing around I have sorted out this problem so I thought someone else may be interested in the result. The UDT (in my case called {member_data} I developed to extract the required property values from the FEU database is as follows:

--------------------------------------------------------------------------------------
global $gCms;
$feusers = $gCms->modules['FrontEndUsers']['object'];
if( $feusers )
{
$uid = $feusers->LoggedInId();
$user_data = $feusers->GetUserProperties($uid);

foreach ($user_data as $record => $row_num) {

foreach ($row_num as $property => $property_data){

if ($property_data == 'firstname') {
$firstname = ($user_data [$record] [data]);
$smarty->assign('firstname',$firstname);

} elseif ($property_data == 'lastname') {
$lastname = ($user_data [$record] [data]);
$smarty->assign('lastname',$lastname);

} elseif ($property_data == 'email') {
$email = ($user_data [$record] [data]);
$smarty->assign('email',$email);

} elseif ($property_data == 'phone') {
$phone = ($user_data [$record] [data]);
$smarty->assign('phone',$phone);

} elseif ($property_data == 'postcode') {
$postcode = ($user_data [$record] [data]);
$smarty->assign('postcode',$postcode);

} elseif ($property_data == 'town') {
$town = ($user_data [$record] [data]);
$smarty->assign('town',$town);
}
}
}
}
-------------------------------------------------------------------------------

A few notes:

1. The line "$user_data = $feusers->GetUserProperties($uid);" fetched the FEU array values.
2. The outer foreach loop iterates through the rows of the multidimensional array.
3. The inner foreach loop iterates through the properties of each row, looking via the elseif statements for the required property - firstname, lastname etc
4. Lines such as "$firstname = ($user_data [$record] [data]);" return the data (the actual name etc) for the row the elseif selects.
5. Lines such as "$smarty->assign('firstname',$firstname);" make the variables available to smarty tags (see below)

The tag entries in the template to return the variables and call the form are:

-------------------------------------------------------------------------------
{member_data}
{cms_module module='FormBuilder' form='b_tempted' value_fld25= $firstname value_fld26= $lastname value_fld27= $email value_fld28= $phone value_fld29= $postcode value_fld32= $town}
-------------------------------------------------------------------------------

Notes:

1. {member_data} runs the UDT(above) that sets up the variables with the user data and makes them available to the FormBuilder module call.
2. Assignments such as "value_fld25= $firstname" pre-load the returned user data automatically into the form in the matching field. Note that I have used field numbers - field names can also be used.

I hope the info helps someone. Cheers, Michael.

tosd · Post by **tosd** » Sat Feb 09, 2008 4:54 am

Yes, the issue of passing FEU data to a Formbuilder form is solved but I am now having difficulty with submission. Essentially, even though the data pre-populates the form (apparently) correctly, submitting the form generates the following error:

"Warning: htmlspecialchars() expects parameter 1 to be string, array given in /home/xxxxxx/public_html/modules/FormBuilder/classes/DispositionEmailBase.class.php on line 145"

When I view source the data appears to be a normal value string.

If the variables are not passed to the form but manually typed in, no errors are generated.

If anyone can help with this I would be very grateful. I have checked other posts but have not come across a solution.

jtcreate · Post by **jtcreate** » Sun Sep 26, 2010 12:56 pm

Good tips....

Rafain, is there a way to do this with the 'email results to' field? I've got an address sitting in a special user property from feu that I'd like to auto-populate the form with, so the form is sent to that address.

Any help is appreciated.

Thx,
Jeff T.

leximus · Post by **leximus** » Wed Sep 07, 2011 8:55 am

Thanks for all the tips that helped me a lot!

I have called user details this way:

{cms_module module=FrontEndUsers form="silent"}

Thanks again,

Lex

CMS Made Simple Forums

[Solved] Passing FrontEndUser user data to a FormBuilder form

[Solved] Passing FrontEndUser user data to a FormBuilder form

Re: Passing FrontEndUser user data to a FormBuilder form

Re: Passing FrontEndUser user data to a FormBuilder form

Re: Passing FrontEndUser user data to a FormBuilder form

Re: Passing FrontEndUser user data to a FormBuilder form

[Solved] Re: Passing FrontEndUser user data to a FormBuilder form

Re: [Solved] Passing FrontEndUser user data to a FormBuilder form

Re: [Solved] Passing FrontEndUser user data to a FormBuilder form

Re: [Solved] Passing FrontEndUser user data to a FormBuilder