Hi,
I currently have the problem that I updated a few a of my websites from 0.13 to 1.02 and ran into trouble with 2 of the sites:
1.) I can't login any longer to www.bugovsky.com/admin. No user works.
2.) frankreich-guide.com has some menu problems after updating. The menu should stay horizontal, but for some unfathomable reason it spits out the page the user is currently on and makes a linebreak or paragraph right before and after that, which really breaks the menu. As I read a few posts, I copied the "Accessibility and cross-browser tools" stylesheet from a fresh install and appended it to my template. Still no luck.
If any of you guys and gals have an idea, I would be thankful.
Can't login after update to 1.02
Re: Can't login after update to 1.02
2)
the active page link is changed to h3, you might want to style it similar to li a
(maybe something like
)
OR change the menumanager template to not change active page to h3
(with simple menu its something like
{* CSS classes used in this template:
.activeparent - The top level parent when a child is the active/current page
li.active0n h3 - n is the depth/level of the node. To style the active page for each level separately. The active page is not clickable.
.clearfix - Used for the unclickable h3 to use the entire width of the li, just like the anchors. See the Tools stylesheet in the default CMSMS installation.
li.sectionheader h3 - To style section header
li.separator - To style the ruler for the separator *}
{if $count > 0}
{foreach from=$nodelist item=node}
{if $node->depth > $node->prevdepth}
{repeat string="" times=$node->depth-$node->prevdepth}
{elseif $node->depth prevdepth}
{repeat string="" times=$node->prevdepth-$node->depth}
{elseif $node->index > 0}
{/if}
{if $node->current == true}
url}">Current page is {$node->hierarchy}: {$node->menutext}
{elseif $node->parent == true}
url}"{if $node->accesskey != ''} accesskey="{$node->accesskey}"{/if}{if $node->tabindex != ''} tabindex="{$node->tabindex}"{/if}{if $node->titleattribute != ''} title="{$node->titleattribute}"{/if}>{$node->hierarchy}: {$node->menutext}
{elseif $node->type == 'sectionheader'}
{$node->menutext}
{elseif $node->type == 'separator'}
{else}
url}"{if $node->accesskey != ''} accesskey="{$node->accesskey}"{/if}{if $node->tabindex != ''} tabindex="{$node->tabindex}"{/if}{if $node->titleattribute != ''} title="{$node->titleattribute}"{/if}{if $node->target != ''} target="{$node->target}"{/if}>{$node->hierarchy}: {$node->menutext}
{/if}
{/foreach}
{repeat string="" times=$node->depth-1}
{/if}
(remove red parts and add green parts)
hope this helps
for the login problem. can you set debug on and test again and check if there are any errors
the active page link is changed to h3, you might want to style it similar to li a
(maybe something like
Code: Select all
#menu ul li a,
#menu ul li h3
{
background-color: transparent;
background-repeat: repeat-x;
padding: 8px 12px 8px 12px;
font-size: 12px;
color: #fff;
font-weight: bold;
display:inline;
}OR change the menumanager template to not change active page to h3
(with simple menu its something like
{* CSS classes used in this template:
.activeparent - The top level parent when a child is the active/current page
li.active0n h3 - n is the depth/level of the node. To style the active page for each level separately. The active page is not clickable.
.clearfix - Used for the unclickable h3 to use the entire width of the li, just like the anchors. See the Tools stylesheet in the default CMSMS installation.
li.sectionheader h3 - To style section header
li.separator - To style the ruler for the separator *}
{if $count > 0}
{foreach from=$nodelist item=node}
{if $node->depth > $node->prevdepth}
{repeat string="" times=$node->depth-$node->prevdepth}
{elseif $node->depth prevdepth}
{repeat string="" times=$node->prevdepth-$node->depth}
{elseif $node->index > 0}
{/if}
{if $node->current == true}
url}">Current page is {$node->hierarchy}: {$node->menutext}
{elseif $node->parent == true}
url}"{if $node->accesskey != ''} accesskey="{$node->accesskey}"{/if}{if $node->tabindex != ''} tabindex="{$node->tabindex}"{/if}{if $node->titleattribute != ''} title="{$node->titleattribute}"{/if}>{$node->hierarchy}: {$node->menutext}
{elseif $node->type == 'sectionheader'}
{$node->menutext}
{elseif $node->type == 'separator'}
{else}
url}"{if $node->accesskey != ''} accesskey="{$node->accesskey}"{/if}{if $node->tabindex != ''} tabindex="{$node->tabindex}"{/if}{if $node->titleattribute != ''} title="{$node->titleattribute}"{/if}{if $node->target != ''} target="{$node->target}"{/if}>{$node->hierarchy}: {$node->menutext}
{/if}
{/foreach}
{repeat string="" times=$node->depth-1}
{/if}
(remove red parts and add green parts)
hope this helps
for the login problem. can you set debug on and test again and check if there are any errors
-
wientanz
Re: Can't login after update to 1.02
Thanks! Changing the MenuTemplate did it.
And how can I set the debug mode?
And how can I set the debug mode?
-
wientanz
Re: Can't login after update to 1.02
Ok, just found the debug option in the config.php.
When I try to log in, this happens. It all looks good, but the link to the admin are is just wrong. When I enter the right user and pw, I get sent back to the login. When I enter a unknown user/wrong passwd, it says right that. But not when I enter the right user. Strange. Debug data is:
When I try to log in, this happens. It all looks good, but the link to the admin are is just wrong. When I enter the right user and pw, I get sent back to the login. When I enter a unknown user/wrong passwd, it says right that. But not when I enter the right user. Strange. Debug data is:
Code: Select all
Debug is on. Redirecting disabled... Please click this link to continue.
/admin/login.php
Debug: (3.7000000000009E-05) - (461232)
loading smarty
Debug: (0.009687) - (698752)
loading adodb
Debug: (0.012204) - (753608)
loading page functions
Debug: (0.016531) - (911992)
loading content functions
Debug: (0.020412) - (1068016)
loading pageinfo functions
Debug: (0.021958) - (1094744)
loading translation functions
Debug: (0.023213) - (1109904)
loading events functions
Debug: (0.027145) - (1189640)
loading template functions
Debug: (0.034715) - (1273712)
loading gcb functions
Debug: (0.038173) - (1347608)
loading module class
Debug: (0.046249) - (1672992)
loading bookmark functions
Debug: (0.049037) - (1704064)
loading content class
Debug: (0.060921) - (2111568)
loading user functions
Debug: (0.074287) - (2172776)
loading group functions
Debug: (0.099449) - (2204616)
loading stylesheet functions
Debug: (0.114596) - (2250952)
loading user tags functions
Debug: (0.138171) - (2273160)
done loading files
Debug: (0.32549) - (2846424)
<br>
(mysql): SELECT sitepref_name, sitepref_value from cms_siteprefs<br>
Error (0): <br>
Debug: (0.35091) - (2887144)
<br>
(mysql): SELECT * FROM cms_userplugins<br>
Error (0): <br>
Debug: (1.283571) - (3156256)
<br>
(mysql): SELECT * FROM cms_modules ORDER BY module_name<br>
Error (0): <br>
Debug display of 'End of include':(2.31247) - (5232800)
Debug: (2.314134) - (5195992)
No session found. Now check for cookies
Debug: (2.314205) - (5196160)
No cookies found. Redirect to login.
Debug: (2.331941) - (5197952)
<br>
(mysql): SELECT user_id FROM cms_users WHERE username = 'Stefan' AND password = '****removed****' AND active = 1 AND admin_access = 1<br>
Error (0): <br>
Debug: (2.332648) - (5199200)
<br>
(mysql): SELECT username, password, active, first_name, last_name, admin_access, email FROM cms_users WHERE user_id = '1'<br>
Error (0): <br>
Debug: (2.332815) - (5199216)
Got user by username
Debug: (2.332874) - (5199368)
user Object
(
[id] => 1
[username] => Stefan
[password] => ****removed****
[firstname] =>
[lastname] =>
[email] => ****removed****
[active] => 1
[adminaccess] => 1
)
Debug: (2.332937) - (5199816)
Starting login procedure. Setting userid so that other pages will pick it up and set a cookie.
Debug: (2.333396) - (5199776)
<br>
(mysql): SELECT preference, value FROM cms_userprefs WHERE user_id = '1'<br>
Error (0): <br>
Debug: (2.33542) - (5201304)
<br>
(mysql): INSERT INTO cms_adminlog (timestamp, user_id, username, item_id, item_name, action) VALUES (1159822154,'1','Stefan','1','Stefan','User Login')<br>
Error (0): <br>
Debug: (2.337451) - (5202072)
<br>
(mysql): SELECT eh.tag_name, eh.module_name, e.originator, e.event_name, eh.handler_order, eh.handler_id, eh.removable FROM cms_event_handlers eh
INNER JOIN cms_events e ON e.event_id = eh.event_id
ORDER BY eh.handler_order ASC<br>
Error (0): <br>
Debug: (2.338062) - (5201592)
<br>
(mysql): SELECT version from cms_version<br>
Error (0): <br>
