Page 1 of 1
[fixed] Pb with button "Apply" in Design Man...
Posted: Sun Jun 22, 2014 8:40 am
by oliver100
In the Design Manager page, for the Templates and Stylesheets tabs, when I modify the content and click on Apply button, the server returns a blank page with just the text "AJAX GOOD".
For the Designs tab, this button works fine.
(tested on Chrome and Firefox)
Re: Pb with button "Apply" in Design Manager
Posted: Sun Jun 22, 2014 9:04 am
by uniqu3
This should be fixed in latest SVN
Re: Pb with button "Apply" in Design Manager
Posted: Mon Jun 23, 2014 5:15 pm
by oliver100
I've replaced the 2 corresponding files and the bug has disappeared (the modifications are well saved).
But for these two tabs, the messages (on the top of the window) "Template saved" or "Stylesheet saved" do not display.
Re: Pb with button "Apply" in Design Manager
Posted: Mon Jun 23, 2014 5:48 pm
by uniqu3
Pull SVN rev. 9629, test again.
I do not know what file you replaced with what, therefore do full pull and report properly.
Thanks.
Re: Pb with button "Apply" in Design Manager
Posted: Tue Jun 24, 2014 8:30 pm
by oliver100
OK. I replaced all the files of the module DesignManager. The messages of confirmation (of Apply) seem good but their behavior for Templates and Stylesheet is different of the case of Designs :
pop-up slides downward in the case of Designs but it appears brutally for the two others.
And, for these two tabs, it appears a message "lock_warning" (not translated in french version).
Re: [open] Pb with button "Apply" in Design Man...
Posted: Thu Jun 26, 2014 5:12 pm
by oliver100
OK. Corrected in SVN 9632.
Except the small difference on the display of response message (in front of the screen) between the gabarits and stylesheets tabs and the design tab. For both first ones, it appears suddenly, for the third, it slides slowly downward.
Thank you. You can close this subject.
Re: [fixed] Pb with button "Apply" in Design Man...
Posted: Fri Jun 27, 2014 8:22 am
by jce76350
@ olivier100
And, for these two tabs, it appears a message "lock_warning" (not translated in french version).
all the french files are translated
you must download
ALL the files from the SVN revision 9541
@ uniqu3 : using the last rev SVN 9633
I confim that I have the message in french
"Un autre utilisateur est en train de modifier cet élément. Vous ne serez pas en mesure d'enregistrer votre travail jusqu'à l'expiration de la temporisation de blocage. " into tab Templates and Stylesheets