I'd like to protect a specific area (6.1.1 - 6.1.9) of my CMS MS homepage that only user which came from an IP range.

I have tested the module IPRestrictedArea, but at my 0.12.1 Version the result was a nocache error message.
The module is also not the best choice, because one can only choose a specific IP address and not an IP address range.

I need a module which gives access to the protected area only to IP addresses of the following range:
xxx.yyy.zzz.000 - xxx.yyy.zzz.063  +  aaa.bbb.ccc.000 - aaa.bbb.ccc.254

Does anybody know a module which is able to do this ?

Try CustomContent

though you will also have to install the feusers module, you won't need to use it.

_________________
Follow me on twitter
For quality help follow these instructions:
a) Think about the problem for an hour
b) research the problem for an hour
c) spend 1/2 an hour explaining it and providing as much information as you can muster
(too much information is okay, not enough information may get your question ignored).
--
if you can't bother explaining your problem well, why should we bother helping with it.
----------------
Don't make me angry..... you won't like me when I'm angry....

Thank you for your tip. It works if i have a range from 83.135.128.[0-63].

But how should i modify the template, if i have a range from
83.135.128.0 - 83.135.159.255  and also
81.209.134.[0-63] and also
149.209.134.[0-63] ?

you should be able to put multiple ip ranges on the tag



all of the tests it appears (probably not tested very well though) can take multiple arguments, the entire test passes if any one of the conditions is true. 

_________________
Follow me on twitter
For quality help follow these instructions:
a) Think about the problem for an hour
b) research the problem for an hour
c) spend 1/2 an hour explaining it and providing as much information as you can muster
(too much information is okay, not enough information may get your question ignored).
--
if you can't bother explaining your problem well, why should we bother helping with it.
----------------
Don't make me angry..... you won't like me when I'm angry....

Great, i'm also able to create pages which are visible for multiple ranges:

like

But now this results in a new question:
Is the module CustomContent also available for the menu manager ?
I would like to show the menu only if the user is coming from the given IP address range.